Ametherm Launches Industry-First 277 V Thermistor for LED Lighting, PFC, and Power Supply Applications

The following press release was issued today by Ametherm.

Agency Contact                              Ametherm Contact:
Bob Decker                                     Lori Morton
Redpines                                        Ametherm
+1 415 409 0233                            +1 775 884 2434
This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript enabled to view it.

Link to product datasheet:
https://www.ametherm.com/datasheetspdf/SL1010003.pdf

Link to product image:
http://www.redpinesgroup.com/Ametherm/SL10_10003.jpg

For Immediate Release

Ametherm Launches Industry-First 277 V Thermistor for LED Lighting, PFC, and Power Supply Applications
http://www.redpinesgroup.com/Ametherm/SL10_10003.jpg
New Device Features Industry-Best Current, Energy, and Power Ratings

CARSON CITY, Nev. — April 9, 2015 — Ametherm today released a new UL-approved circuit protection thermistor that is the industry’s first to offer a 277 V rating optimized for applications including LED lighting and ballasts, power factor correction (PFC) circuits, and inrush current control in uninterruptible power supplies (UPS) with ratings under 500 W.

Ametherm’s new SL10 10003 thermistor features the highest energy, continuous current, and ambient temperature ratings for any device in its size and class. The device handles steady state current up to 3 A with a maximum received energy rating of 17 J. The device features a dissipation constant of 11 mW/°C and can handle a body temperature of 151°C at 100% of its maximum current rating. Maximum capacitance at the device’s 277 V voltage rating is 200 μF.

The SL10 10003 provides a more compact alternative to larger NTC devices or the more expensive combination of a power resistor, relay and timer or implementation of the same functionality with active circuits.

“The SL10 10003 thermistor is the simplest and most cost-effective way to limit inrush current in LED driver and ballast circuits, as well as in PFC circuits,” said Eric Rauch, president and CEO at Ametherm. “It’s a unique made-in-USA, UL-approved way for designers to get the 277 V headroom they need for more reliable LED lighting circuitry and for power supplies with ratings under 500 W.”

The SL10 10003 thermistor is available direct or through distributors such as Mouser, Digi-Key, Newark element14, and Farnell. Samples and production quantities of the SL10 10003 are available now, with factory lead times of four to five weeks. Volume pricing for U.S. delivery starts at $0.20 per piece.

For more information or to request a sample, visit www.ametherm.com. Or call 800-808-2434 (toll free in the United States) or 775-884-2434 from outside the U.S. and Canada.

# # #

About Ametherm
Ametherm, headquartered in Carson City, Nevada, was founded in 1994 and specializes in inrush current limiting power thermistors for circuit protection in the power market industry. Ametherm’s devices are some of the highest rated in the industry and provide the widest range of inrush current protection available. For more information, visit www.ametherm.com or call 800-808-2434. For more information visit our  Inrush Current and Thermistor pages.

ENDS

Follow Us

Facebook iconTwitter iconLinkedin iconYoutube icon