Blog Archives

New PTC Thermistors by Ametherm Offer Industry’s Highest Voltage Rating and Lowest Resistance for Pre-Charge Circuits

CARSON CITY, Nev. — November 15, 2018 — Ametherm introduced today a new series of ceramic PTC circuit protection thermistors that combine the industry’s highest voltage rating with lowest available resistance. The CL20 Series PTC Thermistors provide an alternative to fixed resistors and are optimized for inrush current limiting in pre-charge circuits, heater applications, in addition to over-current protection.   The PTC thermistors released today deliver voltage ratings up to … Continue Reading

Comments Off on New PTC Thermistors by Ametherm Offer Industry’s Highest Voltage Rating and Lowest Resistance for Pre-Charge Circuits

Ametherm to Showcase NTC Thermistors for Li-Ion Batteries and Green Energy Applications at The Battery Show 2018

  Highlights to include probe assembly with ring lug, inrush current limiters for input energy up to 1200 J   CARSON CITY, Nev. — August 22, 2018 — Ametherm today announced its product lineup for The Battery Show 2018, taking place September 11-13 at the Suburban Collection Showplace in Novi, Michigan. At booth 2050, the company will highlight its leading NTC thermistor solutions for Li-ion batteries and green energy applications, … Continue Reading

Comments Off on Ametherm to Showcase NTC Thermistors for Li-Ion Batteries and Green Energy Applications at The Battery Show 2018

Ametherm Upgrades to ISO 9001:2015 Certification

  CARSON CITY, Nev. — July 10, 2018 — As part of its efforts to continually meet national and international standards, Ametherm today announced that the company has upgraded the quality management system (QMS) at its Carson City, Nevada, facilities from ISO 9001:2008 to ISO 9001:2015. Ametherm’s facilities have been ISO 9001-certified since August 2007. ISO 9001 is the international standard that specifies requirements for a QMS. The latest version of the standard … Continue Reading

Comments Off on Ametherm Upgrades to ISO 9001:2015 Certification

Ametherm Introduces New NTC Thermistor Probe Assembly With Ring Lug Designed for Easy and Secure Li-ion Battery Terminal Mounting

  Device Provides Accurate Temperature Sensing for EV Batteries, Off-Grid Energy Storage, and Alternative Energy Applications   CARSON CITY, Nev. — June 19, 2018 — Ametherm today introduced a new NTC thermistor probe assembly for high-accuracy temperature sensing and measurement in Li-ion battery power applications. The device combines a specially designed ring lug for battery mounting with a high dielectric voltage rating of 4000 VAC.   Ametherm’s NTC thermistors are manufactured from a specially … Continue Reading

Comments Off on Ametherm Introduces New NTC Thermistor Probe Assembly With Ring Lug Designed for Easy and Secure Li-ion Battery Terminal Mounting

Ametherm to Showcase Wide Variety of NTC Sensing Thermistors at Sensors Expo & Conference 2018

Highlights to Include Probe Assembly With Ring Lug and ACCU-Curve Series NTC Thermistor With Insulated Tinned-Copper Leads   CARSON CITY, Nev. — June 6, 2018 — Ametherm today announced its product lineup for Sensors Expo & Conference 2018, taking place June 26-28 at the McEnery Convention Center in San Jose, California. In booth 1516, the company will be highlighting a wide range of its leading NTC thermistor sensors for high-accuracy … Continue Reading

Comments Off on Ametherm to Showcase Wide Variety of NTC Sensing Thermistors at Sensors Expo & Conference 2018

Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at EDS 2018

CARSON CITY, Nev. — May 1, 2018 — Ametherm today announced its product lineup for EDS 2018, taking place May 15-18 at The Mirage in Las Vegas. In suite A44, the company will be highlighting a wide range of its leading NTC and PTC inrush current limiters for reliable circuit protection and NTC thermistor sensors for high-accuracy temperature compensation and measurement.   “EDS is an important event for Ametherm, as … Continue Reading

Comments Off on Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at EDS 2018

Ametherm Releases New ACCU-Curve Series Thermistor With Insulated Tinned-Copper Leads

Interchangeable Device Eliminates Conduction Between Leads for the Highest Temperature Sensing Accuracy   CARSON CITY, Nev. — April 09, 2018 — Ametherm today announced that the company has extended the capabilities of its ACCU-Curve series of interchangeable NTC thermistors with the ACL-011. This new device features insulated tinned-copper leads, ensuring the most accurate temperature sensing with no unintended conduction between leads. Ametherm’s ACL-011 delivers long-term stability and reliability for high-accuracy … Continue Reading

Comments Off on Ametherm Releases New ACCU-Curve Series Thermistor With Insulated Tinned-Copper Leads

New Ametherm Inrush Current Limiting NTC Thermistors Withstand up to 1200 J of Input Energy and 80 A Currents

Link to detailed information: https://www.ametherm.com/inrush-current/mm35-din-series-high-power-inrush-current-applications/ Link to product image: http://www.redpinesgroup.com/Ametherm/Ametherm_MM35.jpg Devices Feature DIN-Rail-Mountable Packages for Easy Installation in Industrial and Green Energy Applications CARSON CITY, Nev. — March 5, 2018 — Ametherm today announced a new series of inrush current limiting NTC thermistors designed to withstand high input energy of 1200 J and steady-state currents from 50.0 A to 80.0 A at 680 V. Offered in DIN-rail-mountable packages, MM35-DIN series … Continue Reading

Comments Off on New Ametherm Inrush Current Limiting NTC Thermistors Withstand up to 1200 J of Input Energy and 80 A Currents

Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at APEC 2018

CARSON CITY, Nev. — Feb. 26, 2018 — Ametherm today announced its product lineup for the Applied Power Electronics Conference and Exposition (APEC) 2018, taking place March 4-8 in San Antonio, Texas. In booth 640, the company will be showcasing a wide range of its leading NTC and PTC inrush current limiters for reliable circuit protection and NTC thermistor sensors for high-accuracy temperature compensation and measurement. Highlighted Ametherm inrush current … Continue Reading

Comments Off on Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at APEC 2018

Ametherm UL-Approved Circuit Protection Thermistor With Compact 15-mm Diameter Delivers High Current to 4.0 A and Energy Ratings to 50 J

CARSON CITY, Nev. — July 6, 2017 — Ametherm today announced a new circuit protection thermistor that offers the industry’s smallest diameter for a UL-approved device with a maximum continuous current rating of 4.0 A and energy rating of 50 J. Previously, designers had to rely on devices with larger diameters of 22.0 mm to achieve the high current and energy ratings of the new SL15 60004. Offering a radial … Continue Reading

Comments Off on Ametherm UL-Approved Circuit Protection Thermistor With Compact 15-mm Diameter Delivers High Current to 4.0 A and Energy Ratings to 50 J

New Ametherm Online Calculators Help Designers Quickly Determine Thermistor Beta, Temperature Coefficient, and Resistance Temperature

CARSON CITY, Nev. — Aug. 21, 2017 — Ametherm today introduced a new calculators page to its website. Offering a convenient and time-saving resource, the online calculators allow design engineers to quickly determine the beta value of NTC thermistors, in addition to their temperature coefficient and resistance temperature characteristics using the Steinhart-Hart Equation. A thermistor’s beta value indicates the shape of the curve representing the relationship between the device’s resistance … Continue Reading

Comments Off on New Ametherm Online Calculators Help Designers Quickly Determine Thermistor Beta, Temperature Coefficient, and Resistance Temperature

Ametherm UL-Approved Circuit Protection Thermistor Delivers Current to 6.0 A and Energy Ratings to 40 J in Compact 12.3 mm Diameter

CARSON CITY, Nev. — June 7, 2017 — Ametherm today announced a new circuit protection thermistor that offers the industry’s smallest diameter for a UL-approved device with a maximum continuous current rating of 6.0 A and energy rating of 40 J. The small size and high current rating of the SL12 10006 make it ideal for appliance motors and fractional horsepower motor drives, 300 W to 600 W switch mode power … Continue Reading

Comments Off on Ametherm UL-Approved Circuit Protection Thermistor Delivers Current to 6.0 A and Energy Ratings to 40 J in Compact 12.3 mm Diameter

Unity Sales Offers Ametherm’s Full Line of Inrush Current Limiters and NTC Thermistors

CARSON CITY, Nev. — April. 26, 2017 — Ametherm today announced that it has expanded its network of value-added representatives in the United States with the conclusion of a new agreement with Unity Sales. Effective immediately, Unity Sales is offering Ametherm’s entire lineup of inrush current limiters and NTC thermistors in Ohio, Indiana, Michigan, Kentucky, Western Pennsylvania, and West Virginia. Based in Fort Wayne, Indiana — with offices in all … Continue Reading

Comments Off on Unity Sales Offers Ametherm’s Full Line of Inrush Current Limiters and NTC Thermistors

Ametherm Participates as Exhibitor and Showcases Product Line during APEC 2017 Conference

For Immediate Release: Ametherm to Showcase Leading NTC and PTC Inrush Current Limiting Thermistors at APEC 2017 CARSON CITY, Nev. — March 15, 2017 — Ametherm today announced its product lineup for the Applied Power Electronics Conference and Exposition APEC 2017, taking place March 26-30 in Tampa, Florida. In booth 1426, the company will be showcasing a wide range of its leading NTC and PTC inrush current limiting thermistors for reliable … Continue Reading

Comments Off on Ametherm Participates as Exhibitor and Showcases Product Line during APEC 2017 Conference

Ametherm’s New New UL-approved circuit protection thermistor that helps to conserve power

CARSON CITY, Nev. — March 1, 2017  Ametherm today released a new UL-approved circuit protection thermistor that helps to conserve power, save space and lower costs for a wide variety of applications with industry-best hot resistance, current handling, and energy ratings. The new SL32 0R230 released today is the only UL-approved circuit protection thermistor on the market with a maximum continuous current rating of 30 A and “hot” resistance on … Continue Reading

Comments Off on Ametherm’s New New UL-approved circuit protection thermistor that helps to conserve power

Glass-Encapsulated Thermistors Deliver Long-Term Stability & Reliability in Automotive & Industrial Applications

These Hermetically Sealed Glass Encapsulated Thermistors Provide Moisture Resistance, High-Temperature Operation and Small Size CARSON CITY, Nev. — Feb. 15, 2017 — Today, Ametherm introduced a new series of thermistors called DG Glass Encapsulated Thermistors. They provide long-term stability and reliability for high-accuracy temperature sensing in automotive and industrial applications. Hermetically sealed, DG Glass Encapsulated Thermistors eliminate errors in resistance readings due to moisture penetration, while offering high operating temperatures and a … Continue Reading

Comments Off on Glass-Encapsulated Thermistors Deliver Long-Term Stability & Reliability in Automotive & Industrial Applications

Ametherm Sample Kits Now Available From Mouser Electronics

CARSON CITY, Nev. — Dec. 19, 2016 — Ametherm today announced that sample kits of the company’s inrush current limiters and NTC sensing thermistors are now available from leading electronic component distributor Mouser Electronics. Mouser is stocking Ametherm’s Standard, Mega, Mini, and Sensor Sample Kits. “Consisting of Ametherm’s most popular inrush current limiters and NTC sensing thermistors, our convenient sample kits provide designers with a quick and easy way to … Continue Reading

Comments Off on Ametherm Sample Kits Now Available From Mouser Electronics

Ametherm’s ACCU-Curve Series of Interchangeable Thermistors Now in Stock at Mouser

Agency Contact: Bob Decker Redpines +1 415 409 0233 bob.decker@redpinesgroup.com Ametherm Contact: Lori Morton Ametherm +1 775 884 2434 lori@ametherm.com   For Immediate Release Ametherm’s ACCU-Curve Series of Interchangeable Thermistors Now in Stock at Mouser   CARSON CITY, Nev. — Jan. 27, 2016 — Ametherm today announced that its ACCU-Curve series of interchangeable thermistors is now being stocked by Mouser Electronics. The components are available worldwide via Mouser’s award-winning website, www.mouser.com, … Continue Reading

Comments Off on Ametherm’s ACCU-Curve Series of Interchangeable Thermistors Now in Stock at Mouser

Ametherm to Showcase Latest NTC Thermistors for High-Accuracy Temperature Measurement at Sensors 2014

The following press release was issued today by Ametherm. Agency Contact:                            Ametherm Contact: Bob Decker                                    Lori Morton Redpines                                       Ametherm +1 415 409 0233                           +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.       This email address is being protected from spambots. You need JavaScript … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm to Showcase Latest NTC Thermistors for High-Accuracy Temperature Measurement at Sensors 2014

Ametherm Doubles Manufacturing Capacity Since 2013 Acquisition of Thermistor Product Lines From Measurement Specialties

The following press release was issued today by Ametherm. Agency Contact:                                Ametherm Contact: Bob Decker                                        Lori Morton Redpines                                           Ametherm +1 415 409 0233                              +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.          This email address is being protected from spambots. You need … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Doubles Manufacturing Capacity Since 2013 Acquisition of Thermistor Product Lines From Measurement Specialties

Ametherm’s NTC Disc Thermistors Now in Stock at Rhopoint

Agency Contact: Bob Decker Redpines +1 415 409 0233 This email address is being protected from spambots. You need JavaScript enabled to view it. Ametherm Contact: Lori Morton Ametherm +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.   For Immediate Release Ametherm’s NTC Disc Thermistors Now in Stock at Rhopoint  CARSON CITY, Nev. — November 11, 2015 — Ametherm … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm’s NTC Disc Thermistors Now in Stock at Rhopoint

New Ametherm ACCU-Curve Series of Interchangeable Thermistors

Devices Deliver Long-Term Stability and Fast Thermal Response Time for Medical, Industrial, and Automotive Applications   CARSON CITY, NV–(Oct 22, 2015) – Ametherm today introduced a new series of interchangeable thermistors that provide long-term stability and reliability for high-accuracy temperature sensing, control, and compensation. ACCU-Curve series thermistors are available in a wide range of resistance values, with tight tolerances of ± 0.2 °C between 0 °C and 70 °C and fast thermal … Continue Reading

Bookmark the permalink. | Comments Off on New Ametherm ACCU-Curve Series of Interchangeable Thermistors

Ametherm Introduces Customization Capabilities for NTC Thermistor Probe Assemblies

Agency Contact: Bob DeckerRedpines+1 415 409 0233This email address is being protected from spambots. You need JavaScript enabled to view it. Ametherm Contact: Lori Morton+1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it. For Immediate Release Ametherm Introduces Customization Capabilities for NTC Thermistor Probe Assemblies Available with Custom Housings, Lead Wires, Resistance, Tolerances, and More, Devices Provide High-Accuracy Temperature Measurement CARSON … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Introduces Customization Capabilities for NTC Thermistor Probe Assemblies

New Ametherm Thermistor Delivers Industry-High 680 V Voltage Rating for Welding Equipment and Plasma Cutters

The following press release was issued today by Ametherm. New Ametherm Thermistor Delivers Industry-High 680 V Voltage Rating for Welding Equipment and Plasma Cutters CARSON CITY, Nev. — July 29, 2015 — Ametherm today announced a new PTC circuit protection thermistor with an industry-high voltage rating for inrush current limiting and overcurrent protection in applications such as welding equipment and plasma cutters with extremely high voltages from 480 V to … Continue Reading

Bookmark the permalink. | Comments Off on New Ametherm Thermistor Delivers Industry-High 680 V Voltage Rating for Welding Equipment and Plasma Cutters

Ametherm Signs Rep Agreement With Trendsetter Electronics

The following press release was issued today by Ametherm. Agency Contact:                                     Ametherm Contact: Bob Decker                                            Lori Morton Redpines                                               Ametherm +1 415 409 0233                                   +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Signs Rep Agreement With Trendsetter Electronics

New Ametherm Thermistors Deliver Industry-High Energy Ratings to 12 J and Current to 4 A

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact:Bob Decker                                     Lori MortonRedpines                                        Ametherm+1 415 409 0233                            +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript enabled to view it.    … Continue Reading

Bookmark the permalink. | Comments Off on New Ametherm Thermistors Deliver Industry-High Energy Ratings to 12 J and Current to 4 A

Ametherm Announces ISO 9001:2008 Recertification

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact:Bob Decker                                     Lori MortonRedpines                                        Ametherm+1 415 409 0233                             +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript enabled to view it.    … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Announces ISO 9001:2008 Recertification

Ametherm to Exhibit Leading Inrush Current Limiters and NTC Sensing Thermistors at EDS 2015

The following press release was issued today by Ametherm. Agency Contact:                                                       Ametherm Contact:Bob Decker                                                              Lori MortonRedpines                                                                 Ametherm+1 415 409 0233                                                     +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.                                This email address is being protected from spambots. You … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm to Exhibit Leading Inrush Current Limiters and NTC Sensing Thermistors at EDS 2015

Ametherm Launches Industry-First 277 V Thermistor for LED Lighting, PFC, and Power Supply Applications

The following press release was issued today by Ametherm. Agency Contact                              Ametherm Contact: Bob Decker                                     Lori Morton Redpines                                        Ametherm +1 415 409 0233                            +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript enabled to view … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Launches Industry-First 277 V Thermistor for LED Lighting, PFC, and Power Supply Applications

Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at APEC 2015

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact: Bob Decker                                     Lori Morton Redpines                                        Ametherm +1 415 409 0233                            +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm to Showcase Leading Inrush Current Limiters and NTC Sensing Thermistors at APEC 2015

Ametherm Named as Business of the Year for 2014 by Carson City, Nevada, in NNDA Pioneer Awards

The following press release was issued today by Ametherm. Agency Contact:                               Ametherm Contact:Bob Decker                                       Lori MortonRedpines                                          Ametherm+1 415 409 0233                              +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.          This email address is being protected from spambots. … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Named as Business of the Year for 2014 by Carson City, Nevada, in NNDA Pioneer Awards

Ametherm’s NTC Disc Thermistors Now in Stock at Mouser

The following press release was issued today by Ametherm. Agency Contact:                                   Ametherm Contact: Bob Decker                                          Lori Morton Redpines                                             Ametherm +1 415 409 0233                                 +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.            This email address is being protected … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm’s NTC Disc Thermistors Now in Stock at Mouser

Ametherm Announces Distribution Agreement With Rhopoint Components

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact: Bob Decker                                     Lori Morton Redpines                                        Ametherm +1 415 409 0233                            +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Announces Distribution Agreement With Rhopoint Components

Ametherm Expands U.S. Rep Network, Signs Agreements With L&W Power Corp, Southeast Power Components, and C&N Associates

The following press release was issued today by Ametherm. Agency Contact:                                  Ametherm Contact: Bob Decker                                         Lori Morton Redpines                                            Ametherm +1 415 409 0233                                +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.            This email address is being protected … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Expands U.S. Rep Network, Signs Agreements With L&W Power Corp, Southeast Power Components, and C&N Associates

Ametherm Celebrates 20 Years of Reliable Circuit Protection and High-Accuracy Temperature Measurement

The following press release was issued today by Ametherm. Agency Contact:                             Ametherm Contact: Bob Decker                                     Lori Morton Redpines                                        Ametherm +1 415 409 0233                            +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Celebrates 20 Years of Reliable Circuit Protection and High-Accuracy Temperature Measurement

MegaSurge Series: Inrush Current Limiting NTC Thermistors

The News: Ametherm receives Underwriters Laboratories (UL) certification for its MegaSurge series of inrush current limiting NTC thermistors. In addition to recognition per UL file number E209153, the devices are the industry’s only inrush current limiters certified to UL 1434 for single – and three-phase input voltages up to 480 VAC. Key Benefits: UL recognition for ensured safety One-component solution Reduces costs Simplifies designs Increases safety Enhanced performance over traditional … Continue Reading

Comments Off on MegaSurge Series: Inrush Current Limiting NTC Thermistors

Ametherm’s SURGE-GARD™ Inrush Current Limiters Certified to UL 1434 for Single- and Three-Phase Input Voltages to 480 VAC

Agency Contact:                               Ametherm Contact:Bob Decker                                      Lori MortonRedpines                                         Ametherm+1 415 409 0233                             +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.         This email address is being protected from spambots. You need JavaScript enabled to view it.          Link to detailed product specifications:https://www.ametherm.com/surge-gard/ … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm’s SURGE-GARD™ Inrush Current Limiters Certified to UL 1434 for Single- and Three-Phase Input Voltages to 480 VAC

Ametherm’s SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors Now in Stock at IBS Electronics

Agency Contact:                                Ametherm Contact:Bob Decker                                       Lori MortonRedpines                                          Ametherm+1 415 409 0233                              +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.          This email address is being protected from spambots. You need JavaScript enabled to view it.        Link to detailed product specifications:https://www.ametherm.com/surge-gard/  Link … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm’s SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors Now in Stock at IBS Electronics

Ametherm Introduces New NTC Chip Thermistors in Compact Sizes With High Temperature Ratings to +150 °C

The following press release was issued today by Ametherm. Agency Contact:                                  Ametherm Contact: Bob Decker                                         Lori Morton Redpines                                             Ametherm +1 415 409 0233                                 +1 775 884 2434 This email address is being protected from spambots. You need JavaScript enabled to view it.            This email address is being protected … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Introduces New NTC Chip Thermistors in Compact Sizes With High Temperature Ratings to +150 °C

Chips From Nevada-Based Ametherm Rank in Top Tier of Electronic Design’s Top 101 Components List

Agency Contact:                              Ametherm Contact:Bob Decker                                      Lori MortonRedpines                                         Ametherm+1 415 409 0233                             +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.         This email address is being protected from spambots. You need JavaScript enabled to view it.          … Continue Reading

Bookmark the permalink. | Comments Off on Chips From Nevada-Based Ametherm Rank in Top Tier of Electronic Design’s Top 101 Components List

Ametherm’s SURGE-GARD™ Line of NTC Inrush Current Limiting Thermistors Now in Stock at Digi-Key

Agency Contact:                             Ametherm Contact:Bob Decker                                    Lori MortonRedpines                                       Ametherm+1 415 409 0233                           +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.       This email address is being protected from spambots. You need JavaScript enabled to view it.         Link to detailed product specifications:https://www.ametherm.com/surge-gard/ Link to product … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm’s SURGE-GARD™ Line of NTC Inrush Current Limiting Thermistors Now in Stock at Digi-Key

Ametherm Introduces New NTC Surface-Mount Thermistors in 0805, 1005, and 1206 Case Sizes

The following press release was issued today by Ametherm. Agency Contact:                             Ametherm Contact:Bob Decker                                    Lori MortonRedpines                                       Ametherm+1 415 409 0233                           +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.       This email address is being protected from spambots. You need JavaScript enabled to view it.    … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Introduces New NTC Surface-Mount Thermistors in 0805, 1005, and 1206 Case Sizes

KR NTC Surface Mount NPA May 2014

KR Series: NTC Surface-Mount Thermistors The News: Ametherm introduces a new series of NTC surface-mount thermistors for high-accuracy temperature measurement. Key Benefits:•    Wide range of resistance values•    Fast thermal response times•    Tight tolerances•    Available in standard EIA 0805, 1005, and 1206 case sizes•    Provide an alternative to radial leaded devices•    High-temperature operation to +150 °C•    RoHS-compliant and lead (Pb)-free•    Five-sided wraparound, silver palladium terminations•    Available in bulk or tape-and-reel packaging … Continue Reading

Bookmark the permalink. | Comments Off on KR NTC Surface Mount NPA May 2014

NTC Chip Thermistor NPA April 2014

NTC Chip Thermistors The News: Ametherm introduces new NTC chip thermistors for high-accuracy temperature measurement.Key Benefits: • Wide range of resistance values at 25 °C from 100 Ω to 500 kΩ • Precision tolerances to 1 % • Fast thermal response times • Provide an alternative to thermocouples in precision circuits • Measure 1.27 mm by 1.27 mm with profiles from 0.5 mm to 3.8 mm • Wide range of … Continue Reading

Comments Off on NTC Chip Thermistor NPA April 2014

Ametherm to Exhibit SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors at EDS 2014

The following press release was issued today by Ametherm. Agency Contact:                             Ametherm Contact:Bob Decker                                    Lori MortonRedpines                                       Ametherm+1 415 409 0233                           +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.       This email address is being protected from spambots. You need JavaScript enabled to view it.    … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm to Exhibit SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors at EDS 2014

RoHS 2 Certification

The following press release was issued today by Ametherm. Agency Contact:                                      Ametherm Contact: Bob Decker                                              Lori Morton Redpines                                                 Ametherm +1 415 409 0233                                     +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.                 This email address is being protected from spambots. You need JavaScript enabled to view it. For Immediate Release Ametherm … Continue Reading

Bookmark the permalink. | Comments Off on RoHS 2 Certification

Ametherm to Showcase SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors at APEC 2014

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact:Bob Decker                                     Lori MortonRedpines                                        Ametherm+1 415 409 0233                            +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.        This email address is being protected from spambots. You need JavaScript enabled to view it.    … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm to Showcase SURGE-GARD™ Inrush Current Limiters and NTC Disc Thermistors at APEC 2014

Ametherm Appoints Renee Fletcher as Director of Sales

The following press release was issued today by Ametherm. Agency Contact:                              Ametherm Contact:Bob Decker                                     Lori MortonRedpines                                        Ametherm+1 415 409 0233                           +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.       This email address is … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Appoints Renee Fletcher as Director of Sales

Ametherm Offers Full Lineup of REACH-Compliant Inrush Current Limiters and NTC Thermistors

Agency Contact:                                 Ametherm Contact:Bob Decker                                        Lori MortonRedpines                                           Ametherm+1 415 409 0233                               +1 775 884 2434This email address is being protected from spambots. You need JavaScript enabled to view it.           This email address is being protected from spambots. You need JavaScript enabled to view it.         For Immediate … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Offers Full Lineup of REACH-Compliant Inrush Current Limiters and NTC Thermistors

Ametherm Opens New Carson City Manufacturing Facility for Circuit Protection Components, Doubling Plant Size

CARSON CITY,-Nev.Dec. 5, 2013-Ametherm, a manufacturer of thermistors and other electronic components for circuit protection, today announced that it has doubled the size of its manufacturing plant with a newly purchased 36,000-square-foot facility on Carson City’s east side. In an industry where Asia-sourced components dominate, Ametherm manufactures all its products in the U.S.A., at its new facility and at a smaller Carson City plant that was its headquarters from 1994 … Continue Reading

Bookmark the permalink. | Comments Off on Ametherm Opens New Carson City Manufacturing Facility for Circuit Protection Components, Doubling Plant Size